Nickel-Clad vs. Nickel-Plated Copper Wire
Both constructions have a copper core. Nickel-clad copper uses a distinct outer metal layer around the core. Nickel-plated copper has a nickel coating applied to the copper surface by electroplating. Ask the supplier to identify the construction explicitly on the drawing or certificate.
Identify the outer alloy and how to specify its thickness
For clad wire, state the required outer alloy. Pure nickel and copper–nickel alloy are different specifications. Say whether the drawing specifies a minimum radial layer thickness, an area fraction or a mass fraction. These bases describe different quantities. If you require a cross-section check, include the sample locations, measurement method and acceptance limit.
For plated wire, specify coating thickness and any coating standard, uniformity or adhesion test required by the application. An example of a commercial clad construction is described in Anomet’s nickel-clad copper technical overview. Obtain the agreed construction and material documentation for the wire you order from OSK.
Compare the wire in its finished application
Give the wire diameter and tolerance, temper, operating atmosphere and temperature. Include forming, crimping, welding or other termination steps. If the assembly relies on a particular resistance per unit length or behavior after thermal exposure, specify how the finished assembly will be tested and what result is acceptable.
What to send for a quotation
Include the drawing or sample description, diameter, cladding alloy and thickness basis, continuous length, total quantity and packaging. Tell us which documents or inspection records you need. OSK’s manual lists a reference diameter range of 0.15–8.0 mm. Confirm availability for the requested diameter, outer alloy and layer requirement.
See OSK nickel-clad copper wire · Send your wire specification